The word “soffit” is derived from the French language, and literally means “something fixed underneath.” It’s most commonly used around a building’s main roof, but soffit can also be used under porches, under arches or columns, under a flight of stairs… pretty much anything that has a visible ceiling.
What is meant by the word soffit?
Definition of soffit : the underside of a part or member of a building (as of an overhang or staircase) especially : the intrados of an arch.
Where did the term soffit come from?
The term soffit is from Italian: soffitto, formed as a ceiling; and directly from suffictus for suffixus, Latin: suffigere, to fix underneath).
Why is soffit called soffit?
The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”. The soffit is basically, any finishing material, such as wood or fiber cement, that is installed to cover the underside of your roof overhang.
What is another name for soffit?
undersidesunderpartsundersurfacessoles
What is pipe soffit?
(pipe technology) The top point of the inside open section of a pipe or box conduit. The soffit is the highest point of the internal surface of a pipe or culvert at any cross-section. The soffit is also referred to as the pipe obvert.
What is the difference between eaves and soffits?
In the widest sense of the term, soffits can refer to the underside of almost anything that’s constructed, including arches and porches. Another way to explain it is to say soffit is the exposed siding underneath your roof’s overhang. … To summarise, an eave is part of a roof system and a soffit is part of the eave.
What is soffit formwork?
Soffit shuttering is applicable where concrete is done on an elevated overhead position. Slab soffits are done using prefabricated steel shuttering sheets or wooden poling boards.
What is the plural of soffit?
The plural form of soffit is soffits.
What is a soffit made of?
Soffits come from different materials. Some come from woods while others are made of uPVC, wood, aluminum, steel or fiber cement. The first material for soffits is wood. If you want to have an old look for your house, you may choose wooden soffits.
Article first time published on
Where is the soffit?
The soffit is part of the overhang where your roof meets your siding. When rain or snow hits your roof, it runs down, and the overhang allows the water to flow away from your house. The soffit is underneath the overhang, between the roof’s edge and side of your home—the bottom of the triangle, if you will.
What is the wood under the roof called?
Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed.
What's the difference between soffit and fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
What's a kitchen soffit?
A kitchen soffit is usually a boxy structure built to hide wiring, pipes, or other mechanicals, or to fill the space between the top of your cabinets and the ceiling. Depending on the age of your home they may be very large and perhaps even extend out past the cabinets.
Is soffit open to attic?
A soffit vent is simply a vent installed into the underside of your home’s eaves (called the soffit) that permits fresh outside air to be drawn up into the attic.
What is a Plancier?
Definition of plancier : the underside of a cornice : soffit.
What is a synonym for Eaves?
In this page you can discover 9 synonyms, antonyms, idiomatic expressions, and related words for eaves, like: overhang, roof, soffit, rim, lintel, sill, joist, floorboard and rafter.
What is the overhanging part of a roof called?
Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.
What is the board under the gutter called?
The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters.
What is the overhang part of a house called?
The eaves are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building. The eaves form an overhang to throw water clear of the walls and may be highly decorated as part of an architectural style, such as the Chinese dougong bracket systems.
What is benching the drain?
The term “drain benching” basically means the built up area of concrete (bricks in some cases) above the level of a pipe within a manhole. Over time this slowly wears away and becomes a place that toilet paper and solids build up eventually causing a blockage, pre formed plastic manholes are an exception.
What is depth to soffit?
Soffit boards are normally between 300mm and 400mm in depth, although I have come across soffits as deep as 2m or more. If you have a deep soffit area it requires some patience because it is the most awkward part of your installation.
What is benching in plumbing?
Manhole benching is the sand and cement haunching that sits between the manhole walls and the channel pipes – it is there to stop rats from leaving the system and to stop the splashing of waste and water from incoming branch lines as this causes waste to build up in the manhole leading to blockages.
How do you pronounce soffit and fascia?
noun, plural fas·ci·ae [fash-ee-ee] for 1, 3-5; fas·cias [fey-shuhz] for 2. a band or fillet, as for binding the hair.
How do you spell fascia board?
The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
What do you call the ceiling outside the house?
An eave is the part of the roof that hangs over the side of the home. Otherwise known as an overhang, eaves are designed to push water clear of the siding.
Can you paint soffit?
Paint the horizontal section of the soffit first, then apply paint to the sides and faces of any corbels or other decorative elements. Don’t forget to paint the backside of any vertical boards or fascia that trim the soffit. You won’t see these rear surfaces, but they need the protection of the paint.
Are soffits made of wood?
Soffits are the panels found under the overhangs on your roof, often made of wood, vinyl, or aluminum. … Traditionally, soffits were made from wood, but with modern advancements, more homeowners are choosing vinyl soffits for their durability and simplified maintenance.
What material is used for soffits?
- Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
- Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
- Aluminum. …
- Fiber Cement.
What type of plywood is used for soffits?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
What are gutters and soffits?
Guttering – Collects rainwater from the roof and discharges it into the downpipes. … The fascia also supports the roof tiles and provides a fixing point and support for the guttering. Soffit Boards – Soffit boards run across the underside of your roofline, with the purpose of protecting the underside of the rafter feet.
